TEL：021-3152 3588    Join Now   Sign In   Cart -  中文
  
UPS         
Battery System         
Racks          
Power Distribution         
NETBOTZ         
Cooling         
Surge Protection         
DATA CENTER SOFTWARE         
  
 EPDU1132M
 EPDU1016B-GB
 EPDU1016B
 SYPM10K16H
 SPR6KLB192V-7A-16P
 SYBT9-B6
HomeProductsUPS Facility 3 PhaseSmart-UPS-VT
Product Name : SUVTP30KHS
Item# : 9151-581
Model : 9151-581
Was Price: CNY0/pc
Now Price : CNY0/pc
Last update : 2016.12.12
Manufacturer :
More Picture：

Smart-UPS VT

APC Smart-UPS VT 30kVA 400V, w/Start-Up 5X8, Internal Maintenance Bypass, & Parallel Capability

APC Smart-UPS VT,24 kW /30 kVA,Input 400V 3PH /Output 400V 3PH, Interface Port DB-9 RS-232, SmartSlot

Includes: Bolt down brackets, CD with software, Installation guide, Network Management Card, Power modules ship installed, Start-Up Service, User Manual

SUVTP30KHS Features

Parallel-capacity capable
Increases total power capacity by using multiple uninterruptible power supplies simultaneously.
Parallel-redundant capable
Power the connected equipment with multiple uninterruptible power supplies to increase system redundancy

Smart-UPS VT Features & Benefits

Availability
Dual mains input
Increases availability by allowing the UPS to be connected to two separate power sources.
Scalable runtime
Allows additional run time to be quickly added as needed.
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.
Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Battery modules connected in parallel
Delivers higher availability through redundant batteries.
Serviceability
Battery replacement without tools
Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Shippable with modules installed
Enables pre-installation UPS staging and testing and faster installation.
Modular design
Provides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.
Manageability
Network manageable
Provides remote power management of the UPS over the network.
InfraStruXure Manager Compatible
Enables centralized management via the APC InfraStruXure Manager.
LCD display
Alpha-Numeric Display which displays system parameters and alarms.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Programmable frequency
Ensures compatibility with different input frequencies.
LED status indicators
Quickly understand unit and power status with visual indicators.
SmartSlot
Customize UPS capabilities with management cards.
Total Cost of Ownership
Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Manual maintenance bypass
Reduces installation costs by eliminating the need for an external mechanical bypass.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Protection
Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Cold-start capable
Provides temporary battery power when the utility power is out.

Output

Output Power Capacity
24 kW / 30 kVA
Max Configurable Power
24 kW / 30 kVA
Nominal Output Voltage
400V 3PH
Output Voltage Note
Configurable for 380 : 400 or 415 V 3 Phase nominal output voltage
Efficiency at Full Load
96.4%
Output Voltage Distortion
Less than 5% at full load
Output Frequency (sync to mains)
47 - 53 Hz for 50 Hz nominal
Other Output Voltages
380, 415
Crest Factor
3 : 1
Topology
Double Conversion Online
Waveform Type
Sine wave
Output Connections
(1) Hard Wire 4-wire (3PH + G)
(1) Hard Wire 5-wire (3PH + N + G)
(1) Screw Terminals
Bypass
Built-in Maintenance Bypass, Built-in Static Bypass

Input

Nominal Input Voltage
400V 3PH
Input Frequency
47 - 70 Hz (auto sensing)
Input Connections
Hard Wire 5-wire (3PH + N + G)
Input voltage range for main operations
304 - 477V
Other Input Voltages
380, 415
Maximum Input Current
41A
Input Breaker Capacity
63 A

Batteries & Runtime

Battery Type
Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof

Communications & Management

Interface Port(s)
DB-9 RS-232, SmartSlot
Pre-Installed SmartSlot™ Cards
AP9631
Control panel
Multi-function LCD status and control console
Audible Alarm
Audible and visible alarms prioritized by severity
Emergency Power Off (EPO)
Yes

Physical

Maximum Height
32.40 inches (823 mm)
Maximum Width
20.59 inches (523 mm)
Maximum Depth
32.01 inches (813 mm)
Net Weight
401.50 lbs. (182.50 kg)
Shipping Weight
487.30 lbs. (221.50 kg)
Shipping Height
50.79 inches (1290 mm)
Shipping Width
28.34 inches (720 mm)
Shipping Depth
43.70 inches (1110 mm)

Environmental

Operating Environment
32 - 104 °F (0 - 40 °C)
Operating Relative Humidity
0 - 95%
Operating Elevation
0-3333 feet (0-999.9 meters)
Storage Temperature
32 - 104 °F (0 - 40 °C)
Storage Relative Humidity
0 - 95%
Storage Elevation
0-10000 feet (0-3000 meters)
Audible noise at 1 meter from surface of unit
55.00 dBA
Protection Class
IP 20

Conformance

Regulatory Approvals
C-tick, CE, EN 50091-2, EN/IEC 62040-3, IEC 61000-3-2, IEC 61000-3-3, ISO 14001, ISO 9001, VFI-SS-111
Standard Warranty
1 year on-site repair or replace with factory authorized Start-Up

Sustainable Offer Status

 

| Clicks:

Online Server
Salesperson①
Salesperson②
Salesperson③
Engineer
Customer service